E-NEWS

  2.   Mastercam Service & Maintenance Releases

  3.   Mastercam Training - Specialized classes offered.

  4.   More Tech Tips from Back Issues

Tech-Tip: New 2D High Speed Toolpaths  

Mastercam X3 introduces new 2D High Speed Toolpaths for Level 1 and Router, all optimized for high speed machining and hard milling.

• Peel Mill efficiently machines open slots and channels using the full depth of the cutting tool. Proprietary microlifts raise the cutting tool a very small amount to avoid dragging the tool across the part floor on the back passes.
• Core Mill automatically machines standing bosses and cores in one easy step that requires less CAD knowledge and model preparation from the programmer.
• Area Mill produces smooth, clean motion when machining pockets. Controls for helical entries, tangent stepovers, and smoothing parameters let you fine tune the motion.
• Rest Mill targets material that previous toolpaths left behind. Mastercam uses all previous toolpaths as the source for the rest mill toolpath, calculates the remaining material, and applies high speed motion between cuts.
• Blend Mill morphs smoothly between two curves, generating motion previously unavailable in 2D toolpaths with fewer retracts and toolpath operations on difficult-to-machine features. Blend Mill also uses the tool's full depth and more of the flute length, resulting in less cycle time and even tool wear.

To find out more about the new 2D High Speed Toolpaths and more click here -> Watch live demos of Mastercam X3 highlights.

Mastercam Service & Maintenance Releases

Want enhancements? Get our Service and Maintenance Downloads for all Mastercam products, Version 9 to our current Version X3, available here: http://www.mastercam.com/Support/Downloads/. Some downloads require Maintenance.

Mastercam Training

We provide state-of-the-art training on the Mastercam system and teach you how to quickly apply Mastercam skills on the job. It is particularly useful for programmers and machinists. For experienced Mastercam users, refresher classes can bring awareness to newly released Mastercam features, and provide greater utilization of your Mastercam system.

Hands on Mastercam training classes at CAD/CAM Solutions are offered on a monthly basis to a limited class size to maximize the amount of material covered and to individualize student’s needs.  We use a projection system so every one in the class can see and follow along with the instructor.

Registration: Please call 770-982-3400 for registration.

Agenda: Arrive at 8:00 am to meet the instructor over coffee and settle in. Class begins promptly at 8:30am . Each class consists of practical exercises and projects. Every 2-3 hours breaks are taken. Lunch is provided at a local restaurant.  Classes finish up around 5:00pm .  The Mastercam Solids class adjourns at Noon .

Location: Our offices are approximately 20 miles east of Atlanta off US Highway 78. Map and directions can be found here.   

Cost: The cost is $250.00 per day, per student. Payment is due on or before the first day of training class. Purchase orders may be faxed to 770-982-3366. 

Classes Offered:

2D Mill Training Class (2 days) is intended for new Mastercam users and covers all aspects of operation, 2D geometry construction, dimensioning, tool libraries, 2-1/2 axis machining functions, customization and verification.

3D Mill Training Class (3 days) is designed for Mastercam users that completed the 2D Mill Training Class or have some 3D experience with Mastercam.  This course emphasizes a practical review of several areas such as 3D wire frame construction, 3D surface modeling, 3D surface machining and basic Solids creation.

Lathe Training Class (1 day) Topics covered are basic lathe design, roughing, finishing, grooving, threading and C-axis machining. This class is geared toward new users of Mastercam Lathe.

5-Axis Training Class (2 days) is for advanced Mastercam users. This class covers all multi axis toolpaths.

Wire Training Class (1 day) is structured for Mastercam users experienced with 2D geometry creation.  In depth 2 and 4-axis wirepath creation is presented

Solids Training Class (1 day) is intended for Mastercam users that have experience with 3D wireframe and surface construction. 

Training Class Schedule

2D Mill -   November 10 & 11 | December 8 & 9

3D Mill -   November 12, 13 & 14 | December 10, 11 & 12

Call us for an up to date schedule for classes such as 5-Axis, Lathe, C-Axis Lathe, Wire and Solids. CAD/CAM Solutions, Inc. reserves the right to change class schedules.

More Tech Tips from Back Issues

Tech Tips from previous years can be found here.

CAD/CAM Solutions, Inc.  accepts Visa, MasterCard and American Express credit cards. Use it to order your books, training or software. It's convenient, and quick.

If you would like more information on any of these topics, or would like to share feedback, send us an e-mail to cadcamso@mindspring.com or call 770-982-3400.

If you have received this email in error please accept our apologies.  If you would like to be removed from this e-mail list or have it sent to the appropriate representative in your organization, please send us an email at remove@cadcamsolutions.net and the address will be removed or updated.